p400 VIP MEMBER Joined Jul 14, 2014 Messages 1,291 Apr 2, 2019 #1 What is the procedure and or tool to tighten the rear brake line that disappears into the back of the right foot peg mount?
What is the procedure and or tool to tighten the rear brake line that disappears into the back of the right foot peg mount?
The Buckeye Rider Joined Jan 1, 2005 Messages 187 Apr 2, 2019 #3 Trial and error. With the footpeg removed tighten it and loosely refit, try again until it fits nicely. Ride On Dave
Trial and error. With the footpeg removed tighten it and loosely refit, try again until it fits nicely. Ride On Dave
Saber13 VIP MEMBER Joined Dec 22, 2010 Messages 230 Apr 2, 2019 #4 Agree with Dave, just finished mine that way.
grandpaul VIP MEMBER Joined Jan 15, 2008 Messages 13,265 Apr 3, 2019 #5 A "line wrench". Basically, a box-end wrench with a slot cut into the box to allow it to slip over the tube. I'm not sure if they sell them in 12-point, but that would be preferable to 6-point for tight spaces.
A "line wrench". Basically, a box-end wrench with a slot cut into the box to allow it to slip over the tube. I'm not sure if they sell them in 12-point, but that would be preferable to 6-point for tight spaces.