Layshaft Bearing ID

danfr · May 12, 2020

Hey all,

I popped my gearbox open to replace my shaft and decided I should check on the layshaft bearing. Does anyone recognize the bearing as the original one or if it is safe to run?

Thanks!

Dan

L.A.B. · May 12, 2020

That's the roller bearing upgrade.

Fast Eddie · May 12, 2020

Wot he said.

Note the bearing was a loose fit in the housing, as evidenced by the punch marks to tighten it up.

L.A.B. · May 12, 2020

"203 EC"

Hopefully, NJ 203EC, not NU 203?

NU203

Torontonian · May 12, 2020

L.A.B. said:
"203 EC"

Hopefully, NJ 203EC, not NU 203?

NU203

That's the baby.

danfr · May 13, 2020

Thanks for the replies. I feel much more confident about the gear box.. I also found out the bearing was purchased from Walridge Motors so I'm going to assume it's safe to run.

Cheers

baz · May 14, 2020

It'll be fine
You can worry about something else now

Layshaft Bearing ID

danfr

L.A.B.

Moderator

Fast Eddie

L.A.B.

Moderator

Torontonian

danfr

baz

Similar threads