kick start bush

Status
Not open for further replies.
Joined
Jul 14, 2008
Messages
1,131
Country flag
is the metal bush in the inner cover ment to be tight & is locktite the correct fix
 
Joined
Jan 22, 2008
Messages
954
Country flag
Splatt — All I can tell you is from my own experience. I fitted inner and outer steel bushes last year. I had to use the heat spanner. Yes, both inner and outer bushes should be an interference fit in the casing. However, if the bush is loose, then Loctite Bearing Fit should do the trick. I would imagine that the shaft and outer bush would also need to be in good nick for this to work. This is unless more experienced forum members say otherwise.
 
Status
Not open for further replies.
Top