Jetting a 34mm Mikuni for a 750 Combat

Status
Not open for further replies.
Joined
Jul 22, 2004
Messages
94
Country flag
Can anyone tell me the proper jetting for a Combat engine with a single 34mm Mikuni.


Thanks
 
34mm mukuni

Hi I have a 69 750 with a single 34mm mukuni carb my bike was rebuilt by CNW build # 57 you can see pix at CNW website the jetting is as follows main jet 230 pilot jet 35 needle jet 159 po needle 6DH3 needle position middle slide 3.0 air jet 2.0 hope this helps
 
Re: 34mm mukuni

DOXFORD said:
Hi I have a 69 750 with a single 34mm mukuni carb my bike was rebuilt by CNW build # 57 you can see pix at CNW website the jetting is as follows main jet 230 pilot jet 35 needle jet 159 po needle 6DH3 needle position middle slide 3.0 air jet 2.0 hope this helps

That thing is beautiful!

I've been buying a boatload of parts from CNW and pick Matt's brain quite frequently.

I'd love to ask you a question or two reagrding your bike. I would like to PM or e-mail them to you if that is ok.
 
Status
Not open for further replies.
Back
Top