Inner/outer primary chain case cover

pierodn

Joined
Nov 10, 2012
Messages
3,154
Country flag
Hi.
There are differences from P11 and N15/G15 inner and outer primary chain case?.
Thank you.
Piero
 
Hi Piero,
As it happens there is a section in the current November issue of the NOC Roadholder which shows the differences, it can also be viewed on line.
Regards, Paul.
 
Paul W said:
Hi Piero,
As it happens there is a section in the current November issue of the NOC Roadholder which shows the differences, it can also be viewed on line.
Regards, Paul.
Click to expand...
Hi.
I am a NOC member but the Roadholdrr is not arrived yet.
I have seen on the web but they not talk about differences.
Thank you.
Piero
 
The P11 inner/outer chaincase has a hole for the footpeg stud that is not in the N15/G15 cases. One could drill the hole in the N15/G15 cases and make a spacer to keep the covers from collapsing.
 
Ron L said:
The P11 inner/outer chaincase has a hole for the footpeg stud that is not in the N15/G15 cases. One could drill the hole in the N15/G15 cases and make a spacer to keep the covers from collapsing.
Click to expand...
Hi Ron,
I understand, thank you so much.
Piero
 
Hi.
I can see that the inner cover has three holes, one for the stator wires, one for the footpeg fixing stud.
What needs the third?
Thank you.
Piero
 
pierodn said:
Hi.
I can see that the inner cover has three holes, one for the stator wires, one for the footpeg fixing stud.
What needs the third?
Thank you.
Piero
Click to expand...

Vent hole - I fit a rubber elbow on the outside to keep water out. Inside has a cast shield to block oil from splashing out
 
You must log in or register to reply here.
Back
Top