Inner/outer primary chain case cover

pierodn · Nov 14, 2016

Hi.
There are differences from P11 and N15/G15 inner and outer primary chain case?.
Thank you.
Piero

Paul W · Nov 14, 2016

Hi Piero,
As it happens there is a section in the current November issue of the NOC Roadholder which shows the differences, it can also be viewed on line.
Regards, Paul.

pierodn · Nov 14, 2016

Paul W said:
Hi Piero,
As it happens there is a section in the current November issue of the NOC Roadholder which shows the differences, it can also be viewed on line.
Regards, Paul.

Hi.
I am a NOC member but the Roadholdrr is not arrived yet.
I have seen on the web but they not talk about differences.
Thank you.
Piero

Ron L · Nov 15, 2016

The P11 inner/outer chaincase has a hole for the footpeg stud that is not in the N15/G15 cases. One could drill the hole in the N15/G15 cases and make a spacer to keep the covers from collapsing.

pierodn · Nov 16, 2016

Ron L said:
The P11 inner/outer chaincase has a hole for the footpeg stud that is not in the N15/G15 cases. One could drill the hole in the N15/G15 cases and make a spacer to keep the covers from collapsing.

Hi Ron,
I understand, thank you so much.
Piero

pierodn · Dec 5, 2016

Hi.
I can see that the inner cover has three holes, one for the stator wires, one for the footpeg fixing stud.
What needs the third?
Thank you.
Piero

BillT · Dec 9, 2016

pierodn said:
Hi.
I can see that the inner cover has three holes, one for the stator wires, one for the footpeg fixing stud.
What needs the third?
Thank you.
Piero

Vent hole - I fit a rubber elbow on the outside to keep water out. Inside has a cast shield to block oil from splashing out

pierodn · Dec 9, 2016

Hi Bill,
Thank you.
Piero

Inner/outer primary chain case cover

Similar threads