How to fit front vernier isolastic

Status
Not open for further replies.
D

Drummer99

VIP MEMBER
Joined
Oct 18, 2013
Messages
157
Country flag
I have been seeing info that the front motor mount needs to be resized for the new front Norvil Isolastic mount. Can anyone tell me what size it needs to be machined to? I cant seem to find anything on it.
Thx
Drummer99
 
not 100% sure but I think if you use MK3 Iso's in a pre MK3 mount, then you have to shorten the mount.
 
I just fitted some to mine. If you get p/n 066130 from Norvil you don't need to modify the housing.
 
Dean is correct ... I did mine several years ago ... no modification needed ...
Craig
 
Ok guys thanks I have the 066130 Did any of you have a problem with excessive clearance in the rear isolastic
Thx
Drummer99
 
Did any of you have a problem with excessive clearance in the rear isolastic
Click to expand...

Only those that buy them from Norvil, the tube is the wrong size, but the furry one says its ok so that's fine then NOT.

You will have to make some bushes to take up the slack, one on each side.
 
Yup ... heard all the stories but ... in this case if you have the correct kit for your model year it will fit with no modification ... I suspect Drummer is missing something simple and will sort it out with no mods
Craig
 
Thanks for all your input I am making bushes to take up the 50 thou variance between the bolt and the tube. Seems to me that this excess play will make a big difference. Looks like the front Iso will fit fine. Not sure why you would go to all the trouble replacing swing arm bushings and taking out all the play just to have this kind of variance on the rear end?
Drummer99
 
Status
Not open for further replies.

Similar threads

Dan1950
  • Locked
Is a Front Vernier Iso-lastic Upgrade Worth the Trouble?
2 3
Replies
50
Views
6,342
drp
D
D
  • Locked
Vernier isolastic does not Fit MK3 front mount
Replies
4
Views
1,169
L.A.B.
L.A.B.
D
  • Locked
Front Vernier Isolastic too tight
Replies
12
Views
1,831
toppy
T
Back
Top