Tornado
VIP MEMBER
- Joined
- Dec 5, 2017
- Messages
- 4,535
In the process of completing a headlanp shell swap from hirider 5 3/4" to roadster 7". All connections were straightfoward match ups or needed a schematic confirmation except for one.
There is a smaller diameter black conduit carrying two wires from harness into shell. One wire is white connects to another white via bullet in shell. Second wire is sort of a reddish brown, no tracer as seen in picture below. There is an unoccupied connector on a properly brown wire (not visible in picture ) continuing into another black conduit with the previous white line. Does the reddish brown go into the brown connector?
Cannot see a brown or reddish brown in schematic other than brake light (brown).
Will whip out the test lamp before committing but thought the forum may known.
There is a smaller diameter black conduit carrying two wires from harness into shell. One wire is white connects to another white via bullet in shell. Second wire is sort of a reddish brown, no tracer as seen in picture below. There is an unoccupied connector on a properly brown wire (not visible in picture ) continuing into another black conduit with the previous white line. Does the reddish brown go into the brown connector?
Cannot see a brown or reddish brown in schematic other than brake light (brown).
Will whip out the test lamp before committing but thought the forum may known.