- Joined
- Dec 28, 2008
- Messages
- 2,035
Yesterday at 1:00 PM eastern time I came down hard on the k/s and fired my project with one kick, extreamly satisfying. This was the first set of chemically induced revolutions this engine has seen in 28 years. I ran it for 9 minutes with 30w non-detergent oil; it didn't run flawlessly, but later today I will re-set the valves, torque the major fasteners, sync the carbs (Twinmax) and shoot the timing, then off for the first 50 miles (weather permitting).
The engine had no leaks (Jim Comstock breather?), and the hydraulic clutch worked like a charm.
Within the next 10 days I will post pictures and write up the build history.
RS
The engine had no leaks (Jim Comstock breather?), and the hydraulic clutch worked like a charm.
Within the next 10 days I will post pictures and write up the build history.
RS