Filler cap

Status
Not open for further replies.
Joined
Jan 10, 2006
Messages
153
Hello:

Does anybody know how to take the filler cap off the tank? I've tried to do it just pushing with another pin and tappin on it with a little hammer with no results at all.

Thanks!
 
That should have worked, what diameter is the pin you are using, it needs to be small.
 
I've found that a straight pull wheel spoke (early Triumph) works pretty well. Be careful not to slip and mar your paint job. (DAMHIK):oops:
 
I have used a 1/8" diameter flat ended pin punch. The pivot pin should be a roll pin so don't use any pointed tool.
 
Status
Not open for further replies.
Back
Top