Corbin Smuggler seat

Status
Not open for further replies.
Joined
Sep 13, 2011
Messages
2
Can anyone tell me if there are any good photos of this seat. The Corbin site is a bit breif on this and before I spend that ammount of money I would love to get some feedback. Any thoughts?
 
put some in my thread before. Made well in fact way better than the gunfighter, fits good, mine was flawless, took a good 8 months or so to get from corbin though :evil:
Corbin Smuggler seat

Corbin Smuggler seat

Corbin Smuggler seat

Corbin Smuggler seat

Corbin Smuggler seat
 
Hey Pelican can you post a couple pictures of your bike with that smuggler seat? Looks verty interesting to me, thanks & P.S. hope your doing better..
 
sure, I'll have to put the tank back on it first. I'll post up some pics later tonight.
thanks, I'm doing a little better, not great, but could be worse



the smuggler is a very tight fit to the fender- you'd have to ditch your grab rail if you have one or else make up a custom like I am planning.
 
ok, took me longer, but here's some pics.
as you can see it fits tight, it's wider than the tank, wider than the framerails, sticks out about even with the side covers, outside edges are lower than the frame rails.

Corbin Smuggler seat

Corbin Smuggler seat

Corbin Smuggler seat

Corbin Smuggler seat
 
seat is less cushy than the double gunfighter i have, nice way to carry some tools and stuff though
Corbin Smuggler seat

Corbin Smuggler seat

Corbin Smuggler seat
 
pelican, thanks for posting the pics. I really like the idea behind this seat, as well as the look, but I'm going to have to hold off so I can worry about things like my bike starting before considering this kind of custom upgrade.

Two questions:

1. What handlebars are those?
2. Without sidetracking too much, what Fender amp (twin?) is in the first photo?
 
i measured them before. They are a little taller not much. I always just figured they were cheap repro's that the po put on.
 
Status
Not open for further replies.
Back
Top