- Joined
- Jul 15, 2010
- Messages
- 637
I had a hard time finding a suitable bolt to make a clutch tool (like many others here) as every store I checked had bolts with only 1.5" of threading regardless of length and only carried 1/2" threaded rod in coarse thread.....but finally found a fully threaded 1.75" 1/2-20 tpi inch bolt at Napa Auto and got it to work with a standard 3" ABS pipe cap after cutting it (the cap) down by about an inch with a hacksaw, also used the lock nut from the clutch adjuster to gain a little more length as it is thinner than a standard nut and used a washer between the nut and the pipe cap. Anyway the combination works great and the parts are cheap (about $10 or so) and easy to find....