- Joined
- Sep 18, 2019
- Messages
- 2
Hey Folks, first post. I've installed a new bearing (Andover Norton from Old Britts) in my clutch assembly. I've installed a new clutch locating circlip as well. When tightened down about 50 ft. lbs. I get a slight eccentric movement if pushing on one side or the other. Thinking the play was in the bearing I got Old Britts to send another...same issue. Bought an SKF bearing locally...same issue. Reinstalled the original one...same issue. So after searching for this problem it seems like others have experienced the same thing. Some saying the locating circlip is deformed (which I checked mine is not). The movement just seems "unnatural" and looks like it would cause trouble down the road. I need some hand-holding here, is the consensus that the wobble is not a problem and just something to live with? Thanks, Scott