Cleaning Clutch Plates

Status
Not open for further replies.
Or boil them in two quarts of water with a box of baking soda stirred in.

NOT in a pot you ever want to cook in again.
 
I like soaking them and cleaning with "Simple Green" and the "Purple" degreaser (that sh*t eats aluminum and take ALL the oils out of you hands, so wear chemical resistant gloves or your hands WILL peel their skin in a couple of days - ask me how I know).

JD
 
Used to soak them in petrol from the tank, then wipe them clean.
Now I usually wipe them with tissue soaked in cellulose thinners.
 
Solvent or detergent on bronze, but only detergent on composite or just drives oil deeper into pores.
 
I put on a pair of disposable plastic gloves ,wipe the plates clean with rag then brake cleaner spray as a final ,outdoors and upwind.The gloves limit contact with solvents and chemicals which are SO carcinogenic. About to order in R.G.M. belt kit and pushrod seal kit so to end doing this .
 
Status
Not open for further replies.
Back
Top