- Joined
- Aug 9, 2005
- Messages
- 218
1974 Commando Mk2 with a new 3-phase Lucas and Podtronics, no Zener. Positive ground. Replaced original Assimilator with SS3AW-P Cool Cat solid state unit and getting a steady red light at all engine speeds.
LED taillight. Halogen headlight is off when charging tested.
With this setup, I assume I should see at least 13.5V at 3,500rpm. Is that correct and, if so, can I safely presume that the problem is the assimilator, not the charging system?
LED taillight. Halogen headlight is off when charging tested.
With this setup, I assume I should see at least 13.5V at 3,500rpm. Is that correct and, if so, can I safely presume that the problem is the assimilator, not the charging system?