NickZ
VIP MEMBER
- Joined
- Oct 31, 2018
- Messages
- 481
Okay, i think I understand now. What contributed to my confusion was that on the AN diagram for 73 where they show the configuration for both 750 and 850, the drawing shows different looking center stands but they both are labeled 48 which refers below to the improved part 06-4031. And they show the 750 spacer as 06-1999. I realize now that they are showing how the 750 would go together with the original center stand, but probably don't sell that one anymore.Probably that powder coating is making the center stand hole a little small - clean it out. I have installed that kit on a 72 and a 74 and there no other issues. The AN parts diagrams/lists show the parts for the original stand and the newer improved stand. You have the newer improved stand. Assuming you have a 750, you need the non-stepped spacer in the center stand, the bolts installed from the inside out, washer outside the center stand, and nut outside that. The bolt/washer/nut lock the spacer to the cradle and the center stand pivots on that spacer.
One last stupid question: The 71 & 72 drawings show the bolt going thru from the center stand side and the 73 drawing shows the bolt coming from the cradle side, as recommended by Greg. Does it make a difference? Is one way better than the other?