- Joined
- Jul 5, 2008
- Messages
- 79
Hey guys,
Am slowly getting the bike back together however am currewntly held up at the primary. The PO had one spacing washer on the centre stud. When I put the chaincase on with one, it seems to leave a gap at the gearbox main shaft. If I removew the spacer, it seems to sit square.
Is it normal/possible to not require any spacers or am I missing something here.
Thanks
Am slowly getting the bike back together however am currewntly held up at the primary. The PO had one spacing washer on the centre stud. When I put the chaincase on with one, it seems to leave a gap at the gearbox main shaft. If I removew the spacer, it seems to sit square.
Is it normal/possible to not require any spacers or am I missing something here.
Thanks