Re-assembly of Mk2 Isolastics, correct sequence & lube

It has been a while since I have done this, and I may have a few parts missing.
Does anyone have a picture breakdown of the parts ....in order of assembly?

The Parts manual does a decent job but I find a picture to be more helpful than a drawing.

Re: Re-assembly of Mk2 Isolastics, correct sequence

Original shim type? Or retrofitted to MKIII type vernier adjust?

Shim type. Found everything. Just need new gaiters and it should be good.

Lots of dirty grease holding the shims and poly spacer together. Isn't silicone spray better?

It will dry pretty well and won't attract dirt.