Correct rubbers for rearsets

[solbero]

I have a rearset (MK3?, Norvil?) fitted to my Norton Commando. I recently bought the complete rubber replacement set from Andover Norton. However, the rubber for gear change lever and kickstarter are not correct.

I can fit the kick start ribber, but it protrudes a good centimeter over the peg. The gear change rubber does not fit at all, the peg is to small. I have fitted the worn original back on.

Does anyone know what would be the correct rubbers?

 

[kommando]

All rearsets, with the exception of those for the 200 JPN 850 mk2a's, are non factory. So you need to find out who supplied the rearsets and see if they still make the rubbers.

 

[solbero]

All rearsets, with the exception of those for the 200 JPN 850 mk2a's, are non factory. So you need to find out who supplied the rearsets and see if they still make the rubbers.

Thanks. The question is then, what rearsets might these be?

 

[B+Bogus]

Have a look at Don Pender's Dunstall replica rubbers @madass140

 

[solbero]

Have a look at Don Pender's Dunstall replica rubbers @madass140

I looked on some images in the Internet and they look like Dunstall replicas. I see that Eurotrash Jambalaya sells rubber sets which probably are the correct ones.