Fast Eddie
VIP MEMBER
- Joined
- Oct 4, 2013
- Messages
- 20,693
Yes it’s available on Amazon U.K. As is the Motion Pro clear. Good stuff.This stuff works amazing, seals by simply pushing on barb fittings, removable, stays pliable for years. I don't know if they distribute it in Europe.
MP Premium Fuel Line, Black 1/4" ID X 3' - Motion Pro
Motion Pro - High quality cables, tools and controls for motorcycles, ATVs, snowmobiles and personal watercraft.www.motionpro.com
Exactly what I did.Then all you need to do is cut the crimped ferrules off both ends and fit two new lengths of fuel pipe with clips.
Definitely 1/4". I put some 5/16 OD fuel filters in my line early this year and had to heat the new lines in hot water to get them in.Brilliant, will give it a go.
Does anyone know what is the most likely ID size, 1/4" or 5/16"? If not, I'll open the crimp, but then I'm probably off the road until until new pipe and clips arrive.
Me too!I'm through with ferrules!
On my '72 it came new with the H pattern fuel lines... all 5/16". I went to the later (safer) setup and used the "not quite 180" 5/16 double banjos which worked fine along wirh the Motion Pro clear line. Have never seen any 5/16" 180 degree double banjos. Did they use 1/4" 180 banjos when they went to the later fuel line setup?