p400
VIP MEMBER
- Joined
- Jul 14, 2014
- Messages
- 1,289
I purchased this Amal concentric level tool a year ago, never used it, got it out today.
Consists of four items, instructions are kinda generic ,
The bottom nozzle (1) appears way too long.
The clear tubing (3) too small in diameter,
confusion on where/how to use the crimp ferrule (2).
So how are you using this ?
Cutting off the nozzle to 10mm instead of 30mm?
maybe the tubing will fit after the beaded end is cut off?
I love Andover and buy most of my Norton items from them.
This is not a complaint.
Consists of four items, instructions are kinda generic ,
The bottom nozzle (1) appears way too long.
The clear tubing (3) too small in diameter,
confusion on where/how to use the crimp ferrule (2).
So how are you using this ?
Cutting off the nozzle to 10mm instead of 30mm?
maybe the tubing will fit after the beaded end is cut off?
I love Andover and buy most of my Norton items from them.
This is not a complaint.