htown16
VIP MEMBER
- Joined
- Apr 29, 2009
- Messages
- 1,483
I have a dribbling primary on my recently rebuild 74. Use ATF so only one place the red stuff can be coming from. Looks like it is coming from the bottom seam between the inner and outer cover. I'll take it apart and clean and check for flat. I carefully shimmed the inner cover when I built the primary.
I installed the rubber band seal with no sealer. Is it a good idea to use a sealer and if so what.
I installed the rubber band seal with no sealer. Is it a good idea to use a sealer and if so what.