Wanted

Wanted Classic Motorcycles & Parts – Norton, Triumph, BSA & More

Wanted - Classic Motorcycles & Parts – Norton, Triumph, BSA & More

Browse or post wanted classic motorcycles & parts
M
Wanted Mk3 primary inner cover
mdt-son
Expires
Views
182
Newark, DE, US
I need a good primary inner cover 06-6023 for my build. Stripped treads are acceptable, cracks or broken parts are not.
TomU
Wanted Mark 2 Flange Adaptor
TomU
Views
215
Reaction score
1
US
Looking for an Amal Mk II flange adapter with a ~ 40mm ID inlet (to fit a Mikuni) with 2" stud centers. These seem rarer than an honest politician https://amalcarb.co.uk/mk-ii-concentric-series/2900-series/flange-adaptors/mark-2-flange-adaptor-32mm.html
Wanted Craven side panniers
Wanted Wanted Craven side panniers
jimbo
Updated
Expires
Views
288
Wanted Craven side panniers
marshg246
Wanted MK3 Fraame
marshg246
Expires
Views
201
Annandale, VA, US
Need a decent MK3 frame without side stand mount damage.
ashman
Wanted Contact board for Lucas handlebar switch
ashman
Views
759
Wanted a contact board/wiring for the inside of a Lucas handlebar switch, I have the housing and new buttons and toggle kit just need the contact board, my original was damaged in the great fire of 82, it melted. Just message me if you have one laying around. Ashley
Wanted Old Britts Norton Oil Pressure Gauge Kit
Wanted Wanted Old Britts Norton Oil Pressure Gauge Kit
Johnny0
Views
683
Wanted Old Britts Oil Pressure Gauge with Mounting Kit and Oil Line.
Marian
Wanted 21/22 teeth TT front sprocket for Commando shaft
Marian
Views
851
Hi, i'm searching for a large front sprocket for my TT AMC gearbox. Thanks!
Magura twin pull brake lever assembly
Wanted Magura twin pull brake lever assembly
ES234
Expires
Views
829
Hi, I am looking for a Magura twin pull brake lever to complete a race bike project. Either new or serviceable will be fine if someone can assist.
S
Wanted MK3 L/H handlebar switch
seattle##gs
Views
768
Seattle, WA, US
I am in need of this switch. Any one have a spare?
M-Hawk
Wanted Inner primary case wanted for 1973 Mk1 Norton Commando 850
M-Hawk
Views
350
England, UK
I'm looking for an inner primary case to fit a 1973 Mk1 Norton Commando 850. Has to be in good condition, with a good felt seal in situ. I'm in the UK. PM me if you have one, thanks!
jimbo
Wanted Looking for a set of NOS or used 850 bodywork-a roadster tank and side covers, Original paint
jimbo
Views
450
Long Shot Want; Looking for a set of NOS or nice used 850 bodywork-a steel roadster tank and pre MK3 side covers. Original factory paint stripes and decals, not repainted. (Or another long shot- a 850 steel highrider tank in orange, in the same condition) What do you have on the shelf...
M
Wanted 1970 or 71 good useable camshaft - commando
macvittiemotorcycles
Views
337
NC, US
Looking for a good usable 1970 or 71 commando end breather type camshaft that I can run without spending too much a new one. All eBay listings look rough
L
Wanted WTB Commando 750S side cover
Lorenzo
Views
311
I need an original blue metalflake side cover for my Commando 750S (or Early Roadster). I need the Right Hand one, but I will consider also the set.. Thank you for helping!
Dave Taylor head steady with spring needed
Wanted Dave Taylor head steady with spring needed
makrph
Views
412
Tony, WI, US
Working on my 1972 Norton Commando Combat, finished with front and rear isolastics along with new swing arm rebuild, just need to improve the head steady.
Looking for this Interpol fairing fitted to a Commando
Wanted Looking for this Interpol fairing fitted to a Commando
jimbo
Views
447
Clinton, IA, US
Looking for this Interpol fairing fitted to a Commando .This type has the molded in pockets for blue lights. Also the blue lights and any other police pieces. Overseas finds are not a problem :)
1 watching
S
Wanted Commando Rear and Front Axle Spacers
Super Seven
Views
303
Spokane, WA, US
Hi. I'm the process of converting a MK II Commando which had cast wheels for the 44 years its been in my family to wire wheel hubs (Unfortunately, the wheel I had built is an early non-cush drive hub). I'm looking for the spacers and lock rings, etc. for both front and rear wheels. Thanks...
F
Wanted clutch operating arm part # 040029 pre Commando
fireflake
Views
287
Walmsley, WA, AU
does anyone have a spare operating arm for a pre Commando box please,( 1962 model 50) David
Manxman or Alas fuel tank
Wanted Manxman or Alas fuel tank
ashman
Views
340
AU
Need a tank for my Manxman project, so a Manxman or Alas tank, I am not happy with the Alloy tank that came with this project bike. Ashley
1 watching
gatsby
Wanted Old rusty Interstate parts wanted.
gatsby
Views
303
NL, CA
Looking for an original Norton steal Interstate tank, silencers, pipes, seat, and side covers. The worse the condition (looking for rust), the better. It is for a mechanically sound “Rustoration” that I am planning. I’m interested in a trade or purchase. I have a lot of original parts to trade...
bsanorton
Wanted Interstate side covers for a 75'
bsanorton
Views
323
St. Augustine, FL, US
Need a set of Interstate side covers for a 75' that doesn't have the tool pocket on left side
Back
Top