Wanted Commando Rear and Front Axle Spacers

Phone
503 801-6775

Details

Hi.

I'm the process of converting a MK II Commando which had cast wheels for the 44 years its been in my family to wire wheel hubs (Unfortunately, the wheel I had built is an early non-cush drive hub). I'm looking for the spacers and lock rings, etc. for both front and rear wheels.

Thanks, Paul Blouin

More in Wanted

Looking for white Craven panniers
Wanted
Wanted Looking for white Craven panniers
jimbo
Expires
Views
205
US
Looking for white Craven top loader panniers, or even ones in black in the USA
M
Wanted
Wanted Mk3 primary inner cover
mdt-son
Updated
Expires
Views
473
Newark, DE, US
I need a good primary inner cover 06-6023 for my build. Stripped treads are acceptable, cracks or broken parts are not.
elefantrider
Wanted
Wanted WTB - Original MK3 Roadster Seat or Cover
elefantrider
Views
208
Los Angeles, CA, US
Any
TomU
Wanted
Wanted Mark 2 Flange Adaptor
TomU
Views
410
Reaction score
1
US
Looking for an Amal Mk II flange adapter with a ~ 40mm ID inlet (to fit a Mikuni) with 2" stud centers. These seem rarer than an honest politician https://amalcarb.co.uk/mk-ii-concentric-series/2900-series/flange-adaptors/mark-2-flange-adaptor-32mm.html
ashman
Wanted
Wanted Contact board for Lucas handlebar switch
ashman
Views
872
Wanted a contact board/wiring for the inside of a Lucas handlebar switch, I have the housing and new buttons and toggle kit just need the contact board, my original was damaged in the great fire of 82, it melted. Just message me if you have one laying around. Ashley

Classified ad information

Posted by
Super Seven
Category
Wanted
Views
389
Location
Spokane 99224

Share this classified ad

Back
Top