Where to put the gasket?

N

Nourish

Joined
Dec 2, 2009
Messages
93
Country flag
With the 2S cam fitted there's 0.040" clearance between the valves and the std 850 pistons - Perfect! But that's with a base gasket (0.030") but no head gasket. So what would be the prefered method to seal the base joint and cylinder head? - I'm thinking I could cut a paper base gasket and and fill the rest of the 0.030" with a thin copper head gasket (and copper wire!) or buy a 0.015" copper sheet and cut that for the base and head gaskets?
 
What's the context?
Race engine? Road rider? Having 40 thou clearance between piston and valve is the goal?
What about assembling it with no base gasket and an old head gasket - does that meet your needs?
 
I just use Yammbond on the base and normal copper head gasket with my 850 2S set up, but my head has been shaved, have had no problem at all doing this set for 42 years now.
 
Nourish said:
With the 2S cam fitted there's 0.040" clearance between the valves and the std 850 pistons - Perfect! But that's with a base gasket (0.030") but no head gasket. So what would be the prefered method to seal the base joint and cylinder head? - I'm thinking I could cut a paper base gasket and and fill the rest of the 0.030" with a thin copper head gasket (and copper wire!) or buy a 0.015" copper sheet and cut that for the base and head gaskets?
Click to expand...
A liberal application of Spray Copper Coat on both sides of the shim.
 
You must log in or register to reply here.

Similar threads

S
pistons
Replies
3
Views
149
marshg246
marshg246
jseng1
The dry Norton
Replies
15
Views
426
johnm
johnm
jseng1
true or false
2 3 4
Replies
60
Views
1,621
acotrel
acotrel
N
Copper Foil Headgaskets for the 850
Replies
3
Views
453
Nourish
N
Yakatak
Fullauto Head...5/16" Stud Issue.
Replies
4
Views
501
Yakatak
Yakatak
Back
Top