Trouble finding lever

Status
Not open for further replies.
G

gprust

Joined
May 22, 2012
Messages
14
The commando took a fall the other day. Nothing hurt except my pride and the brake lever. The master cylinder was installed by the previous owner, and I cannot find any brand name on it. I'm trying to find a replacement brake lever and am not having much luck. I was hoping someone on here could recognize it and point me in the right direction.

Trouble finding lever


Trouble finding lever


Trouble finding lever



Thanks for the help!
 
Definitely Japanese, the brake light switch pin and adjustment look Yammy to me.
 
gprust said:
The master cylinder was installed by the previous owner, and I cannot find any brand name on it. I'm trying to find a replacement brake lever and am not having much luck.
Click to expand...

It looks like a typical 1970's Yamaha (RD, XS etc.) item.
Trouble finding lever
 
Rather than trying to find a replacement lever for an unknown master cylinder I went ahead and ordered the brembo master cylinder from colorado norton works. Thanks for all the replies.
 
gprust said:
Rather than trying to find a replacement lever for an unknown master cylinder I went ahead and ordered the brembo master cylinder from colorado norton works. Thanks for all the replies.
Click to expand...


Why spend little, when you can spend a LOT? JK Were there other shortcomings existing? Tatty looks? Out of place Asian part? Poor functionality? Old/leaky? :?:
 
It was starting to get a bit tatty. Near as I could tell it was an asian part. Definitely out of place. And quite frankly, it was taking a ridiculous amount of time trying to find a replacement lever.
 
Status
Not open for further replies.
Back
Top