However you accomplish it, it needs a good engine ground which is why the red wire is short and goes under the top mounting screw by design.I've installed Pazon Surefires and I've always run the ground back to the positive battery post (positive ground bike). Now I'm doing a Trispark. It just says run red to ground. Is it alright to run it to the positive battery post?
I run that to the same place as the harness red wires connect to the head. Originally, that was the head steady, but I put them under the Allen on the timing side that holds the head steady. That way I'm positive that the harness and the coils have a solid engine ground.Sorry, I should have been clearer. l meant the ground from the first coil positive post.