Re: To rebuild or not to rebuild-dang transmission
Guido,
I am curious why you chose to replace the shafts, did you determine they were worn or damaged?
Did you have any issues with the bushings, I have read they require reaming and that it can be tricky.
Guido said:I just did my box yesterday. New shafts and bushings. Did the roller bearing and shimming is a snap.
Had .042 endfloat, took it up with .030 of rear iso shims, done.
The bearing was about $25
Guido,
I am curious why you chose to replace the shafts, did you determine they were worn or damaged?
Did you have any issues with the bushings, I have read they require reaming and that it can be tricky.