To rebuild or not to rebuild-dang transmission (Rebuilding)

Status
Not open for further replies.
Re: To rebuild or not to rebuild-dang transmission (Rebuildi

Hey Guido, I got the left hand thread for the nut, just have to get a wrench to get it done. I tried 14 mm sockets on the tranny but it would not work on all of them hence ordering the whitworths.
 
Re: To rebuild or not to rebuild-dang transmission (Rebuildi

Hey guys,

I read through the manual and am confused, is the nut on the shaft in the picture a left hand or right hand nut? Don't want to screw this up!

To rebuild or not to rebuild-dang transmission (Rebuilding)
 
Re: To rebuild or not to rebuild-dang transmission (Rebuildi

Good question, you never know with these things. Righty tighty, lefty loosey on this one.

I am trying to think what are other left hand thread beside the tranny...oop, Im sorry, Gearbox sprocket nut?
 
Re: To rebuild or not to rebuild-dang transmission (Rebuildi

Code: 
I got it, was a righty. The sprocket is the lefty from what I was told earlier. Got some of the guts out, need a 1 1/2 spanner to get sprocket nut off and the rest done. So far looks ok, will post pics when I get more time. Got ribs cooking so will be paying that attention and  will probably be worthless after that.
 
Status
Not open for further replies.
Back
Top