Tight primary chain/ second gearbox adjuster

Status
Not open for further replies.
A mate with a Roadster took some smaller nuts and drilled and tapped them out to 5/16" , that gives more clearance for his spanner around the engine plates, 7/16" AF spanner (wrench).
Regards Mike

Wish I’d thought of that !
 
These are eccentric rear wheel adjusters off a TW200 I have on my shelf, I've wondered about mounting one on the GB cradle aft of the upper mount on the drive side. My thinking is that this will help resist the pull of the rear chain and maintain proper tension. It's a low tech solution.


Tight primary chain/ second gearbox adjuster
 
Status
Not open for further replies.
Back
Top