Throttle Lock anyone use them?

  • Thread starter Thread starter Voodooo
  • Start date Start date
V

Voodooo

Guest
I have a Dominator Naked and a Commando SF.
Does anyone use a throttle lock for long rides?
My Dominator has the clip ons and the Commando has the up right bars.
Thanks guys!
 
I used a wrist buster for my ride to North Carolina. But haven’t since Ive been back. TonyA has a wrist buster. No throttle lock tho
 
A funny thing happened with swapping out my grips today. I needed to replace the throttle side before I went riding as the original grip split horizontally almost all the way across. I didn't have time to use glue so I went without. This resulted in a change in the springback ... it barely has any now! So I kind of have the equivalent of a throttle lock now. :p
 
Last edited:
contours said:
A funny thing happened with swapping out my grips today. I needed to replace the throttle side before I went riding as the original grip split horizontally almost all the way across. I didn't have time to use glue so I went without. This resulted in a change in the springback ... it barely has any now! So I kind of have the equivalent of a throttle lock now. :p
Click to expand...
Sure you didn't just push it up a little too far or its rubbing the bar end?
 
I've used throttle locks on most of my bikes for the last few years. They help me avoid hand cramps on longer rides. I haven't fitted one yet to my 961, but will do so in the near future.

Ken
 
If I were to do a throttle lock, I'd do the bar end type. The seem more compact, aesthetically pleasing and easier to manipulate.
 
Nothing wrong with using these, but do bear in mind that if, and I say, if, you are suddenly ejected from your saddle for any reason the engine will go revving on and on- it would be peace of mind if you use them with an ignition cut-out chord that wraps around you wrist.
 
If you call them and tell them the diameter of your handlebars they will tell you which one fits your bike. I haven’t ordered mine yet so not certain which one I’m going to go with. Will work on this next week and post it when I do.
 
Bernhard said:
Nothing wrong with using these, but do bear in mind that if, and I say, if, you are suddenly ejected from your saddle for any reason the engine will go revving on and on- it would be peace of mind if you use them with an ignition cut-out chord that wraps around you wrist.
Click to expand...
It only continues revving if the bike doesn’t fall, because when bike falls the tilt switch will immediately cut off the engine...
 
Last edited:
Well, there is a tilt switch connected to the ECU. And when bike tilts this switch will cut the engine off. At least my MKI bike has this switch and it works...
 
It looks like this (newer version):
Throttle Lock anyone use them?
 

Similar threads

gpzkat
Anyone use a Gunson Colortune?
2
Replies
20
Views
1,819
CanukNortonNut
CanukNortonNut
D
Alton Installation tips
Replies
0
Views
703
DennisMo
D
BikerBore
Birmingham Norton Test Ride and Comparison.
2 3 4 5
Replies
81
Views
7,224
Clive
Clive
JCD
  • Locked
MK3 Throttle cable
Replies
2
Views
825
JCD
JCD
A
  • Locked
Threads and posts jumping all around while I try to read them
Replies
8
Views
1,062
Jerry Doe
Jerry Doe
Back
Top