Speedo drive
- Thread starter YING
- Start date
- Status
Lineslinger
VIP MEMBER
- Joined
- Feb 26, 2017
- Messages
- 1,964
ARP assembly lube. I have used this lube on a lot of engine builds and car restorations.
Apply very sparingly to avoid slinging. I rebuilt the speedo drive unit almost 3 years ago and the lube is still doing its job.
Apply very sparingly to avoid slinging. I rebuilt the speedo drive unit almost 3 years ago and the lube is still doing its job.
- Joined
- Nov 20, 2004
- Messages
- 21,110
I used to use LM grease but found that after removing a drive gearbox the gear teeth would often be bone dry and the grease stuck uselessly to the inside of the housing. I also found hardened grease would build up behind the drive ring eventually making it very stiff to turn so now I use gear oil.
comnoz recommends https://www.jewellamberoil.com/
www.accessnorton.com
comnoz recommends https://www.jewellamberoil.com/
Standard grease fitting for speedo drive
Has anybody found a standard grease fitting that screws into the speedo drive w/o retapping the threads? I'd like to use a standard USA grease gun on the speedo drive. It is a replacement from Baxters. They are getting quite expensive so I don't want this one to let loose. Thanks in advance, Marshal
www.accessnorton.com
- Joined
- Dec 28, 2009
- Messages
- 5,557
Interesting.
I have this assembly oil in a tiny bottle and will try it instead of grease .
My rear tire is pooched in about a week so when the rear wheel comes off I'll clean out any caked up older grease and apply some assembly oil sparingly.
I have this assembly oil in a tiny bottle and will try it instead of grease .
My rear tire is pooched in about a week so when the rear wheel comes off I'll clean out any caked up older grease and apply some assembly oil sparingly.
Deets55
VIP MEMBER
- Joined
- Oct 3, 2013
- Messages
- 1,649
John Deere cornhead grease.
per Hobot
per Hobot
John Deere Special-Purpose Corn Head Gun Grease - AN102562
www.greenpartstore.com
- Status
