- Joined
- Jul 22, 2013
- Messages
- 98
Cleaning up the edges.
Getting the right bends in the material was a little difficult. 5lb lump hammer and a vice did the trick.
I trimmed the center stand to give me the needed clearance for the lower part of the bracket.
Brake reattached along with the side stand bracket.
Side stand mounted to the bracket.
Bike sits at a perfect angle, for now I'm leaving the original side stand attached.
Art
Getting the right bends in the material was a little difficult. 5lb lump hammer and a vice did the trick.
I trimmed the center stand to give me the needed clearance for the lower part of the bracket.
Brake reattached along with the side stand bracket.
Side stand mounted to the bracket.
Bike sits at a perfect angle, for now I'm leaving the original side stand attached.
Art