maylar
VIP MEMBER
- Joined
- May 13, 2007
- Messages
- 4,213
The latest glitch in my rebuild is that after the head work done by Memphis Motor Werks, there's no adjustment on the valve clearances. Even with the adjusters all the way out one valve is tight to the adjuster (I have mushroom head adjusters). Leo suggests trimming the pushrods 40-50 thou.
OK, so I have a lathe available but how do you get the cups off the ends of the pushrods?
OK, so I have a lathe available but how do you get the cups off the ends of the pushrods?