Chris
VIP MEMBER
- Joined
- Jan 21, 2008
- Messages
- 1,769
A few problems have reared their heads!
The T160 clutch cover has a breather in the top of the case which is going to foul the drive side carb float bowl nut & the rocker box oil feed. Also the primary drive has its oil breather pipe mounted on the back of the case itself & due to the original primary & T150 clutch having been cut & shaped extensively will no longer work. Another inner primary case is required & a method of turning the breather hose 90 degrees is also required. Still at least I've started.
The T160 clutch cover has a breather in the top of the case which is going to foul the drive side carb float bowl nut & the rocker box oil feed. Also the primary drive has its oil breather pipe mounted on the back of the case itself & due to the original primary & T150 clutch having been cut & shaped extensively will no longer work. Another inner primary case is required & a method of turning the breather hose 90 degrees is also required. Still at least I've started.
