Rearset Question

Status
Not open for further replies.
Norcoastal said:
I’m pumped. I had to fabricate a spacer, but it worked out perfectly!!!

Rearset Question
Click to expand...
And the icing on the cake is to use 5/16 x 1/4 rose joints to do away with those yokes & clevis pins.... they are available but quite expensive... or do what i did buy 5/16 x 5/16 and turned down some spacers to reduce back to 1/4
 
olympus said:
And the icing on the cake is to use 5/16 x 1/4 rose joints to do away with those yokes & clevis pins.... they are available but quite expensive... or do what i did buy 5/16 x 5/16 and turned down some spacers to reduce back to 1/4
Click to expand...
That’s a really good idea. Thanks for the thought.
 
olympus said:
And the icing on the cake is to use 5/16 x 1/4 rose joints to do away with those yokes & clevis pins.... they are available but quite expensive... or do what i did buy 5/16 x 5/16 and turned down some spacers to reduce back to 1/4
Click to expand...

Did exactly the same with mine.
 
Status
Not open for further replies.
Back
Top