- Joined
- Aug 5, 2017
- Messages
- 1,401
Hi there
I know that the rear mudguard upper mounting plate has spacers against the cross brace.
And the rear guard lower front mounting uses the same bolts as the horn support bracket.
I know that the rear mudguard upper mounting plate has spacers against the cross brace.
And the rear guard lower front mounting uses the same bolts as the horn support bracket.
- So are there any spacers between the horn bracket and guard..as i cant see any listed
- Are nuts run down the set screws securing the horn bracket first, then the guard installed followed but further washers/nuts (so in affect using the first nuts as spacers)
- The guard installed with no spacers and fitted flush up against the horn bracket.