Rear mudguard

Status
Not open for further replies.
Joined
Aug 5, 2017
Messages
1,399
Country flag
Hi there
I know that the rear mudguard upper mounting plate has spacers against the cross brace.
And the rear guard lower front mounting uses the same bolts as the horn support bracket.

  1. So are there any spacers between the horn bracket and guard..as i cant see any listed
  2. Are nuts run down the set screws securing the horn bracket first, then the guard installed followed but further washers/nuts (so in affect using the first nuts as spacers)
  3. The guard installed with no spacers and fitted flush up against the horn bracket.
Thank you
 
Or go with door #4 - dump the boat anchor horn and bracket for a better one and relocate to someplace sensible.
 
That Lucas horn is a lot better than the horn on my 2007 XL1200R. I bought the louder Harley upgrade and it still sounds like a Honda 50.
 
Status
Not open for further replies.
Back
Top