Question about the split clamp mod for swing arm spindle

Discussion in 'Norton Commando Classic Motorcycles' started by oldbeezer, May 16, 2018.

  1. oldbeezer

    oldbeezer VIP MEMBER

    Joined:
    Nov 2, 2017
    I have seen many posts about Kegler's mod for the swing arm spindle. Perhaps I missed it but I have not seen any comments about sealing the holes from the elements. Is it an issue or can I drill merrily away and not worry about it?
    Thanks
    Jim
     
    Tags:
  2. Nater_Potater

    Nater_Potater

    Joined:
    Apr 7, 2013
    I didn't seal mine, but we're in a very dry climate here; use your best judgement. If there's any concern, I would think that a spot of RTV in the hole just before driving the screws home would be good insurance.
    Nathan
     

Share This Page

Loading...