- Joined
- Apr 15, 2009
- Messages
- 11,520
https://www.facebook.com/groups/10302209470/
There is a discussion going on in the Norton Commando Facebook group about a spacer for the Norvil (Les) Production Racer fairing mount. Some of you might recall that when I mounted my fairing the fork tops hit the instruments and I had to make (had made) some fork stop spacers. This left me with a very limited turning radius. I wrote it off as an artifact of a replica racer, but it was mentioned the there may be around three variations of the fairing mount and some do not cause the interference I saw.
I'm going to build a spacer this winter and see if it helps. The drawing that was provided wasn't very clear so I redrew it.
Has anyone here heard of this stuff before? It wasn't mentioned when I was installing mine.