Power Arc ignition

seattle##gs said:
Power Arcs work well if there is a starter motor. If it's kick start it's a real bear.
Click to expand...
Mine works well with the starter so I don’t really kick it much. Took me three kicks to start it warm. If my technique was better I probably could have done it in one. I wanted to do it just to see if I could. Mission accomplished. Now back to the little green button.
 
I've had no issues with mine in 10 years of usage. No electric start and it will only kick back if you do it wrong.
cold start: turn key on and slowly kick thru TDC twice THEN prime and choke as needed and give a forceful kick
hot start: open throttle 1/4 turn and kick briskly-very rare I get a kickback

How many of you have power going to the white wire? Don't know if it matters on starting but it does change the advance curve if it doesn't have 12 volts going to it.
 
MikeG hit it on the head. The P/A is an optical counter so the cam disk needs to revolve one full rev to find its tdc. That means the crank has to revolve twice.
 
I just installed a Tri spark. I corresponded with Stephen there and asked for the advance curve.
At less than 500 rpm, it sparks after top dead centre.
I like that.
Dennis
 
OK. I just put a Tri Spark in the Atlas and wondered why it gives a cough sometimes when I'm starting it.
Something unexpected is that it changed the exhaust note and for the better.
 
CanukNortonNut said:
I didn't but maybe try here:

Click to expand...
Thanks, Dude, but they no longer support the ignition programming, that's why I'm looking for the adapter. I bought it for my landspeed bike and now I can't adjust the map. If I can't find one, I'll have to go with something different. I guess I could sell this one, the pre programmed maps should be great for a stock or lightly modified bike but not good for what I'm doing.
 
George Hirvela said:
Thanks, Dude, but they no longer support the ignition programming, that's why I'm looking for the adapter. I bought it for my landspeed bike and now I can't adjust the map. If I can't find one, I'll have to go with something different. I guess I could sell this one, the pre programmed maps should be great for a stock or lightly modified bike but not good for what I'm doing.
Click to expand...
Have you tried contacting Kenny Cummings New York Nortons. He put me on to this unit. I am not sure if he has the ability to program them. Mind you I bought this from Old Britts ages ago. I would PM him. Maybe he can program the maps for you if he carried on with the PowerArc after OB retired. Its a long shot, but hey you might get lucky.
A phone call to him might be worth it.
Best of Luck.
 

Similar threads

George Hirvela
Power Arc ignition
Replies
15
Views
1,299
George Hirvela
George Hirvela
M
Anyone here use a Power Arc ignition?
2
Replies
20
Views
1,631
Mongrel
M
B
  • Locked
Old Britts Power Arc and strobing the timing.
Replies
13
Views
1,706
MikeG
MikeG
J
  • Locked
Old Brits power arc ignition led
2 3
Replies
42
Views
6,043
guest76
G
Saber13
  • Locked
Smiths Elec Tach W/Power Arc
Replies
3
Views
1,231
Saber13
Saber13
Back
Top