I have some 5/16 aluminum plate and would like to fab some Norvil mounts, does anyone have one that I could get the measurements from?
Is 5/16 plate thick enough?
Jerry
The real thing is .331 thick and as you know 5/16 is .3125 so I think this will work just fine. Understand that thats only part of the hassle though. You will need an Atlas kick start and a kicked out revered shift lever. And you must come up with a suitable rear brake cable and a new brake light switch. Here's some photos of my set up. Go to the next photo to see both sides. http://groups.msn.com/Brit-Fe-Pics/shoe ... hotoID=155 Oh yea you will need to fab up some new exhast brackets as well. hope you have some stainless laying about as well. It's worth it the bike is much more ridable. norbsa
I happen to have a brand new Atlas kick lever that I purchased to do something like this with. I ended up going with Norvil rearsets that I converted to heim joints. In any case, I have this lever, no hardware, no top piece available for, say 50 bucks. It costs 50 pounds from Norvil.
The Access Norton Website uses cookies to keep you logged in if you register.
By continuing to use www.accessnorton.com, you are consenting to our use of cookies.