- Joined
- Nov 1, 2014
- Messages
- 920
I puchased iso replacement bushings and buffers from a canadian supplier who it turns out is getting them from "Norvil" i use Andover part numbers when ordering expecting to get andover parts.
I had a lot of problem installing the bushings as the rubber was hard, but i had no way to compare them as i had never done rebuilt the iso's before. and the vibration does not disappear like i remember as the rpm go up.
so over the weekend i spent some time trying to determine who is Norvil, and i'm even less happy with what i found.
can someone tell me how to verify if the rubber bushings are the right durometer, sadly i assembled this all last year and so the old bushings have been trash canned at that time
I'm not interested in bashing vendors, but
I had a lot of problem installing the bushings as the rubber was hard, but i had no way to compare them as i had never done rebuilt the iso's before. and the vibration does not disappear like i remember as the rpm go up.
so over the weekend i spent some time trying to determine who is Norvil, and i'm even less happy with what i found.
can someone tell me how to verify if the rubber bushings are the right durometer, sadly i assembled this all last year and so the old bushings have been trash canned at that time
I'm not interested in bashing vendors, but