Norvil Disc Carrier

bad_friday · Aug 23, 2012

A few month ago I've bought a new disc carrier from Norvil. Now I've tried to install it but unfortunately the new assemble rattles like hell, because the thickness of the carrier and the (norvil 13") disc is different i.e. the disc is 1.6mm thicker than the carrier. Any idea how to fix this?
Fritz

batrider · Aug 23, 2012

What does Norvil say?

bad_friday · Aug 23, 2012

batrider said:
What does Norvil say?

Didn't ask them rigth now, but sent them an email today.
Fritz

bill · Aug 23, 2012

been there, done that with the norvil 13" disc. the carrier is to soft and the disc and buttons wear it out. My fix was to machine up a spacer and switch to a rotor assembly from a Honda 929-954. not sold on the quality of the norvil stuff.

bad_friday said:
A few month ago I've bought a new disc carrier from Norvil. Now I've tried to install it but unfortunately the new assemble rattles like hell, because the thickness of the carrier and the (norvil 13") disc is different i.e. the disc is 1.6mm thicker than the carrier. Any idea how to fix this?
Fritz

madass140 · Aug 24, 2012

does the Norvil disc have the same offset as the standard cast iron disc?

madass140 · Aug 24, 2012

my production disc, does not have the soft carrier, the carrier is made of the same stainless as the disc,
it may be an option but is 320mm (12.6") not Norvil's 13" so maybe a bit small in diameter.
not as much offset as the standard disc but can be spaced out easily.

bad_friday · Aug 24, 2012

madass140 said:
does the Norvil disc have the same offset as the standard cast iron disc?

Yes it has

bad_friday · Aug 24, 2012

madass140 said:
my production disc, does not have the soft carrier, the carrier is made of the same stainless as the disc,
it may be an option but is 320mm (12.6") not Norvil's 13" so maybe a bit small in diameter.
not as much offset as the standard disc but can be spaced out easily.

Where did you buy it?

madass140 · Aug 24, 2012

I had a batch manufactured for my upcoming brake upgrade, consisting of specially cast slider, this disc and 6 piston caliper, info in other posts, If I remember correctly my disc is about 4mm less offset, there would be no problem fitting a spacer to get the standard offset, I'll check and measure in the morning

madass140 · Aug 24, 2012

A 5.3mm spacer would be needed under my disc to bring it to the standard offset, because my disc is slightly thinner at the mounting flange , the studs are still long enough to accommodate the nut and spring washer, if a 5.3mm spacer was used. just a thought for those flogged out floating discs.

Rohan · Aug 24, 2012

Going to have any discs on ebay in the near future ?
And those left sidecover attachments...

madass140 · Aug 24, 2012

bad_friday · Aug 25, 2012

Rohan said:
Going to have any discs on ebay in the near future ?
And those left sidecover attachments...

What are you talking about :?

madass140 · Aug 25, 2012

these 2 Ebay items 261087739594
261087739361

Norvil Disc Carrier

Similar threads