Hi all,
This forum has been a invaluable resource to me as I'm working through getting my newly acquired non running 73 commando on the road.
I'm based in Key West Florida, I'm unaware of any other vintage Nortons on the island - and the previous owner is no longer with us - So I come here for some virtual brain picking. So far it working out. I finally got her to fire up for the first time yesterday.
As a newbie I do have a (now) amusing story - When i first installed the battery and switched on the ignition the horn would come on - at least I know where the horn is located - what were they thinking!. I downloaded a copy of the Commando Riders Manual found the horn switch disassembled the switch gear and then started chasing my way around the loom with a voltmeter. Perplexed as to why the wires apparently change color between the connectors and the horn. Many hours later (after disconnecting the horn) I finally work out that the switch gear is on the wrong way round and that my horn is operated by the right hand and not the left as in the manual. Is this a stateside thing or model specific?
The cause of the horn switch gear failure was that the master cylinder had failed and leaked - the brake fluid must have been able to flow uphill via capillary action to get into the switch gear. So I've yet to take the bike for a spin as I'm now onto solving the master cylinder replacement/recondition problem.... So close yet so far.
Thanks go to all of you who's brains I have virtual picked to get me this far.
Carl.
This forum has been a invaluable resource to me as I'm working through getting my newly acquired non running 73 commando on the road.
I'm based in Key West Florida, I'm unaware of any other vintage Nortons on the island - and the previous owner is no longer with us - So I come here for some virtual brain picking. So far it working out. I finally got her to fire up for the first time yesterday.
As a newbie I do have a (now) amusing story - When i first installed the battery and switched on the ignition the horn would come on - at least I know where the horn is located - what were they thinking!. I downloaded a copy of the Commando Riders Manual found the horn switch disassembled the switch gear and then started chasing my way around the loom with a voltmeter. Perplexed as to why the wires apparently change color between the connectors and the horn. Many hours later (after disconnecting the horn) I finally work out that the switch gear is on the wrong way round and that my horn is operated by the right hand and not the left as in the manual. Is this a stateside thing or model specific?
The cause of the horn switch gear failure was that the master cylinder had failed and leaked - the brake fluid must have been able to flow uphill via capillary action to get into the switch gear. So I've yet to take the bike for a spin as I'm now onto solving the master cylinder replacement/recondition problem.... So close yet so far.
Thanks go to all of you who's brains I have virtual picked to get me this far.
Carl.