- Joined
- Dec 3, 2013
- Messages
- 66
Good Day and it is good to be back. I previously owned a 1974 850 Commando and regretted ever selling it. I just picked up a 1973 850 Commando and am ready to get started on getting it in prime shape. The previous owner had done a huge amount as far as restoration goes but it still has two major problems.
1. The swing arm has about 1" of side play in it when moving the rear wheel from side to side. I assume it need to be rebushed and checked out. Any information on how this is done would be greatly appreciated.
2. The front disk brake seems to be leaking up at the master cylinder. I have not torn it apart yet and am hoping that new seals in the master and caliper will solve this issue. HOWEVER I would be very interested if anyone knows of another front brake system that can be installed on the bike. Something like a Brembo setup. Again any information would be greatly appreciated.
Here is the new 73 loaded up for the trip home. Hopefully it will be the last time it sees a trailer.
Here is the 74 that I used to own. I sure missed it thus the new bike.
Marc
1. The swing arm has about 1" of side play in it when moving the rear wheel from side to side. I assume it need to be rebushed and checked out. Any information on how this is done would be greatly appreciated.
2. The front disk brake seems to be leaking up at the master cylinder. I have not torn it apart yet and am hoping that new seals in the master and caliper will solve this issue. HOWEVER I would be very interested if anyone knows of another front brake system that can be installed on the bike. Something like a Brembo setup. Again any information would be greatly appreciated.
Here is the new 73 loaded up for the trip home. Hopefully it will be the last time it sees a trailer.
Here is the 74 that I used to own. I sure missed it thus the new bike.
Marc