- Joined
- Sep 22, 2015
- Messages
- 819
Went ahead and rebuilt the carbs (Mikuni VM32s) while waiting on some electrical parts
Decided on the following and will go from there
Main Jet - 230
Pilot Jet - 30
Needle Jet - P2
Needle - 6DH3
Needle Clip Position - P3 (middle)
Air Jet - 1.2
Slide - 2.5
Float Bowl Needle - 3.3
Also got some new springs. Seems to have needed them (new on right)
Decided on the following and will go from there
Main Jet - 230
Pilot Jet - 30
Needle Jet - P2
Needle - 6DH3
Needle Clip Position - P3 (middle)
Air Jet - 1.2
Slide - 2.5
Float Bowl Needle - 3.3
Also got some new springs. Seems to have needed them (new on right)