1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Mk3 Handlebar Risers using OEM upper triple clamp

Discussion in 'Norton Commando Motorcycles (Classic)' started by p400, Apr 8, 2019.

  1. p400

    p400 VIP MEMBER

    Joined:
    Jul 14, 2014
    Searched threads, found nothing useful.
    I would like advice on where to find 7/8" handlebar 1" risers for a Mk3.

    Simply spacers under current bars with longer allen screws.

    HandlebarRisersNorton1.jpg
     
    Last edited: Apr 8, 2019
  2. bill

    bill

    Joined:
    Jun 1, 2003
  3. Time Warp

    Time Warp .......back to the 70's. VIP MEMBER

    Joined:
    Dec 3, 2012
    The OP has been edited so is clearer.
    I deleted my last post as the OP post suggested wanting risers for a 1 inch handlebar which you would be unlikely to find off the shelf.

    https://www.rockymountainatvmc.com/parts/tusk-handlebar-risers-p

    7/8" bar and 30 mm rise so a little higher than one inch but not by much, maybe they come in yellow. :D
     
  4. gortnipper

    gortnipper VIP MEMBER

    Joined:
    Nov 11, 2013
  5. lazyeye6

    lazyeye6 VIP MEMBER

    Joined:
    Feb 28, 2014
    The ROX risers are high quality though a bit pricey. But, they pivot back as well as up so
    one can tune them to individual preference. I had a set on a BMW I had a few years back.
     

Share This Page