- Joined
- Oct 19, 2012
- Messages
- 131
I replaced my layshaft bearing this winter, and was double checking the oil level in the gearbox through the inspection cover when i notoced this circlip laying on the little ledge inside the inner cover right behind the kick start shaft. using a pair of forcepts i retrieved it and compaired it to the parts catalog. It looks like the circlip (part#27) that retains the shift pawl.
My question is do i really have to take the outer cover back off to replace this or will the shifter pawl stay in place without it?
My question is do i really have to take the outer cover back off to replace this or will the shifter pawl stay in place without it?