MK3 brake kit Madass

madass140

VIP MEMBER

Joined

Nov 6, 2011

Messages

2,126

• Apr 4, 2016

• #1

one of my customers fitted my pre MK3 brake kit to his MK3, apparently without any drama, no its not a Brembo, only the decal that he fitted to fool his friends.

 

Danno

Joined

Feb 7, 2010

Messages

4,195

• Apr 5, 2016

• #2

Is that a Tokico caliper like those on a 2000-2001 GSXR 1000?

 

madass140

VIP MEMBER

Joined

Nov 6, 2011

Messages

2,126

• Apr 5, 2016

• #3

yes similar

 

cash

Joined

Nov 10, 2006

Messages

1,530

• Apr 6, 2016

• #4

Grief! you'll be bending the fork stanchions, might be an idea to turn them round once in a while. :wink:

Is the rotor our own?

Dave

 

W

worntorn

VIP MEMBER

Joined

Dec 22, 2006

Messages

8,149

• Apr 6, 2016

• #5

Did he fit your mastercylinder and lever to the MK3 switchgear?

I did this and it was a bit of work (approximately 2 hrs) If so, I would be interested to see photos of how someone else went about doing that fit up.

Glen

 

madass140

VIP MEMBER

Joined

Nov 6, 2011

Messages

2,126

• Apr 6, 2016

• #6

No Glen he resleeved his MK3 mastercylinder to 1/2" which would be the easiest option for MK3.
Yes Dave these are my discs but they have a different offset from the Norton disc, they were made for my disc brake kits

 

commando6868

Joined

Jul 28, 2012

Messages

240

• Apr 9, 2016

• #7

I have the brake setup on my MK111, I just swapped the fork lower on the right, to the left. No more brake fade, awesome upgrade if you ride.